Heating clamps
Kamush HC60/HC75
Laboratory clamp equipped with an aluminum heating block. Enables thermostating or heating laboratory vessels. Excellent for use in temperature-assisted solid phase peptide synthesis. Classic Merrifield vessels or Kamysz vessels can be used. The clamps are controlled via the Kamush mini or Kamush mini 2 controller (with timer). It is recommended to use the clamps on a bar shaker, eg Kamush model (Laboratory shaker with rods LP015RSk).
Excellent temperature stability! Heats to 75°C in less than 3 minutes.
Clamps are available with an aluminum block for vessels/test tubes of 16,22 or 28 mm diameter.
Specification:
- Temperature Range: Ambient to 60°C (HC60) or 75°C (HC75)
- Temperature Display Resolution: 0.1°C
- Temperature Uniformity: ± 0.2°C
- Temperature Accuracy:± 0.2°C
- Temperature Controller: Microprocessor
- User Timer (only for Kamush mini 2 controller - option): 1 to 99 hours
- Control: PI Microprocessor controller (Kamush mini/Kamush mini 2)
- Dimensions:
the length of the heating block 16 – 50mm, 22 - 50mm, 28 -50mm (other dimensions on request)
surface area of the heating element (aluminum block) – 16 - 24cm2 , 22 - 34cm2 , 28 - 53cm2 - Weight of clamp (without controler): -
- Electrical: 100-230V (power supply 24V), 50/60 Hz, 1A
- Heater power: 40W
| Model | Description |
| HC60.16 | clamp for 60°C, diameter 16 mm |
| HC60.22 | clamp for 60°C, diameter 22 mm |
| HC60.28 | clamp for 60°C, diameter 28 mm |
| HC75.16 | clamp for 75°C, diameter 16 mm |
| HC75.22 | clamp for 75°C, diameter 22 mm |
| HC75.28 | clamp for 75°C, diameter 28 mm |
More about kamush heating clamps:
A simple method for raising the temperature in manual peptide synthesis.
A simple method for raising the temperature in manual peptide synthesis.
